Starship Assembly
1: IMPORTANT: Place the base on a flat even surface.This will avoid any breakage of the acrylic.Fit the two upright pillars into the cutouts on the base.The front pillar has a logo make sure that this is facing forward.You have the option to glue these in place so we recommend using only clear super glue like loctite 401 or similar clear cement or gels.We also highly suggest using a square tool to ensure the pillar is straight when fitting.
2: Fit the crossbeam between the two pillars as shown above.The arrow indicates that that end goes to the front.
3: The stand comes with 4 clear rubber pad feet.Apply these to the bottom of the base, this will prevent scratches to the clear acrylic base.
4: Place the Enterprise onto the stand and line up the hole under the ship into the crossbeam tab.The front pillar will secure under the hull protrusions of the hull to stop rotation.Enjoy your new display stand...ENGAGE.
